Micro USB 5pin waterproof interface sink plate 0.8 horizontal waterproof female base, waterproof micro USB female base sink plate type high current plug board with a fixed length of 5.0L. This product belongs to the micro USB motherboard under the waterproof series connector, and the interface model is the micro USB BF interface. Our company's product supports IPX67 waterproof grade, and achieves IPX67 waterproof grade by using processes such as using 5Pin terminal tail integrated adhesive injection and adding waterproof rubber rings on the interface section. The product in the picture is a large photo taken by our company. The micro USB motherboard is fixed by welding with a plug-in board, The overall dimensions of this micro USB motherboard BF waterproof model are: the main body length is 5.0mm, the interface width is 4.0mm (including the thickness of the shell adhesive), the pin width is 0.8mm, and the lateral spacing between the two sides of the pin is 7mm. In terms of electrical performance, the product supports excessive current charging. In terms of material used in the product: the inner layer of the hardware is a high-strength stainless steel shell with a thickness of 0.3mm, and the outer layer of hardware has a thickness of 0.25mm. The plastic body is environmentally friendly and high-temperature resistant plastic. At present, the waterproof micro USB motherboard sinking type has been mass-produced. If you need a sample of the IPX67 plug-in board fixed on the waterproof micro USB motherboard, you can contact our company!

Rated current: 5A

Contact impedance: 40m Ω max

Insulation resistance: 100m Ω min 100V DC

Tinning resistance: temperature 265 ± 5 ° C, time 5 ± 0.5s

Insertion force: 2.04kg (8N) min, 2.04kg (20N) max

Pullout force: 0.81kg (8N) min, 2.04kg (20N) max.

Waterproof grade: IP67/IP68

Product life: over 5000 times