The MICRO USB5pin raised female seat cushion has a height of 1.55/2.5/3.04/4.45 and columns. The purpose of raising the female seat is to solve the problem of uneven connection or improper socket position, providing a more stable connection. This is crucial for devices that require long-term use and stable connectivity. At the same time, raising the mother seat can also prevent short circuits caused by poor metal contact, ensuring the stability of equipment charging and data transmission. When choosing a height pad, the first thing to consider is the specific needs of the equipment. The micro USB 5pin raised female seat with a height of 1.55mm is suitable for situations that require fine-tuning the connector height, providing a slight lifting effect. The 2.5mm raised height is usually used for situations that require certain height adjustments, such as solving uneven connector docking problems; A height of 3.04mm is more suitable for equipment that requires a larger height increase and can effectively compensate for the height difference of connectors; The micro USB 5-pin raised female seat and 4.45mm pad height provide an optional solution for larger height adjustment, usually used when the docking connector position is deep or there is a significant height difference. When selecting a height pad, it is necessary to determine the most suitable height based on the actual situation and needs. The application of column design in elevated base has both advantages and disadvantages. Firstly, the design of the column can improve the stability of insertion and removal, avoid poor contact or loosening, and thus enhance the reliability of the connection. In addition, the design of the column can effectively prevent adverse phenomena such as short circuits and protect the equipment from damage. However, the design of columns may also increase installation difficulty, as accurate installation and positioning of columns are required, and improper operation can easily lead to installation failure. In addition, columns will also increase overall cost and manufacturing complexity. After comprehensive consideration, the choice of elevated base with column design depends on the specific situation.