SPECIFICATIONS:

1.ELECTRICAL CHARACTERISTICS:

1.1.RATING: 1.5A

1.2.CONTACT RESISTANCE: 30 mΩ MAX.(INITIAL);

1.3.DIELECTRIC WITHSTANDING: 500V AC MIN.;

1.4.INSULATION RESISTANCE: 1000MΩ MIN.;

2.DURABILITY: 5,000 CYCLES MIN.;

3.INSERTION FORCE: 3.5Kgf (35N) Max.;

4.EXTRACTION FORCE: 0.8Kgf (8N) Min;

5.WATER PROOFNESS:THIS PRODUCT IS BASED ON IPX7

6.PLUG INTERFACE DIMENSIONS COMFORM TO USB2.0 SPEC.

7.PACKAGING: TAPE & REEL.    

The solder micro 2p motherboard is widely used for mobile phones, digital devices, automobiles, drones, hard drives, and industrial interconnecting devices, and is packaged in bulk.

Kind reminder: There are two reasons for micro USB not conducting: contact with bread glue, skewed contact surface, and inability to contact the male terminal. If these two problems are eliminated, they are poor welding and poor pin lower limit of the male terminal.