The micro USB 3.0 10pin base has a B-type interface, and the entire body is made of a hardware shell by riveting. There are two pins in the middle that make the product lie on the PCB board. There are a total of 10 pin pins at the tail, which are distinguished in the form of five pins. When welding, the 10 pin pin is attached to the PCB board.
The micro USB 3.0 10pin base has a B-type interface, and the entire body is made of a hardware shell by riveting. There are two pins in the middle that make the product lie on the PCB board. There are a total of 10 pin pins at the tail, which are distinguished in the form of five pins. When welding, the 10 pin pin is attached to the PCB board. Dual interface, not only 3.0 standard, but also Backward compatibility 2.0 standard. The interface is a rolling edge interface. There are two types of micro USB 3.0, one is micro B and the other is micro A. The difference lies in the interface on the left. If the interface is in the shape of B, it belongs to micro-B, and if it is in the shape of A, it belongs to micro-A. The product uses materials, hardware shell: high-strength stainless steel, plastic body: environmentally friendly and high-temperature resistant LCP plastic, pins: high conductivity copper. It can withstand repeated plugging and unplugging for over ten thousand times in terms of wear resistance life.
Contact person:
Mr. Chen 136-6225-2835 (same WeChat account)
Miss Chen 189-2385-0895 (same WeChat account)
Chen Weiting 135-3824-4786 (same WeChat account)
Address:
Building 10, Hongxing Gebu Qixiang, Songgang Town, Bao'an District, Shenzhen, Guangdong Province
![]() |
![]() |
Technology 1 | Technology 2 |