Welcome to the official website of Shenzhen Guangjiayuan Electronic Technology Co., Ltd!

  Mr. Chen:136-6225-2835

  Miss Chen:189-2385-0895

Your current location : Home__Product__Waterproof USB base__type-c Waterproof base

Contact Us

Shenzhen Guangjiayuan Electronic Technology Co., Ltd

Mr. Chen: 136-6225-2835 (same WeChat account)

QQ: 979285705

Miss Chen: 189-2385-0895 (same WeChat account)

QQ: 2391552662

Chen Weiting :135-3824-4786 (same WeChat account)

Chen Weihao: 139-2459-4393 (same WeChat account) 

Tel: 86-0755-33182327

Email: gjydz88@163.com

Website: www.usb-type.com

Address: Building 10, Hongxing Gebu Qixiang, Songgang Town, Bao'an District, Shenzhen, Guangdong Province

Type c6p vertical waterproof base SMT patch

Type c6p vertical waterproof base SMT patch

  • category:type-c Waterproof base
  • Release Date:2022-10-20
  • The total length of the type c6p waterproof vertical adhesive base is 7.50mm, and the product is equipped with waterproof rubber rings. There are two pins, with a positioning column on one side, with a diameter of 0.85mm. There are 6 pin terminals at the bottom of the mother base, and the pin pins are widened and thickened, capable of overcurrent of 3A. The service life is 10000 times.

  • Product Introduction

立贴防水type c6p母座

The total length of the type c6p waterproof vertical adhesive base is 7.50mm, which is one of the waterproof type c base series. The product is equipped with waterproof rubber rings. The vertical mount type C mother base has two pins, which are welded to the PCB board during welding. One side is equipped with a positioning column with a diameter of 0.85mm. There is a certain difference in the material ratio between the product and the traditional type c6p mother seat. The shell of the traditional type c6p mother seat is basically made of stainless steel material, except for the pin part which is made of stainless steel material, the rest of the materials used are basically made of environmentally friendly and high-temperature resistant LCP plastic, such as the shell and rubber core. The bottom of the type c6p waterproof base has a 6pin terminal. The core technology of the product lies in the terminal structure, which is different from the 16Pin terminal structure. The 6Pin terminal structure uses fewer raw materials, is convenient in process, and has high production efficiency. Compared with traditional micro USB, this type of interface supports forward and reverse insertion, making it more convenient to use. The pin pin adopts widening and thickening treatment for reliable welding, with low SMT installation defect rate. The plastic front end is formed as a whole, without exposing copper or warping the pin to eliminate the risk of short circuit. It has the advantage of being suitable for high current passing. The 6P mother pin signal includes negative pole, positive pole, CC, and does not include data cables. It has stable performance and relatively low cost, making it suitable for charging equipment that does not require data transmission.

Product performance: Rated current: 3A, contact impedance: 40m Ω max, insulation impedance: 100m Ω min250V DC, withstand voltage test: 300V AC, tin resistance: temperature 250 ± 5 ℃, overall insertion force: 0.5-2.0kgf, overall extraction force: 0.6-2.0kgf, service life: 10000 times, working temperature: -30+85 ℃.


contact information

Contact person: 

    Mr. Chen 136-6225-2835 (same WeChat account)

    Miss Chen 189-2385-0895 (same WeChat account)

    Chen Weiting 135-3824-4786 (same WeChat account)

   Chen Weihao 139-2459-4393 (same WeChat account) 

Address: 

    Building 10, Hongxing Gebu Qixiang, Songgang Town, Bao'an District, Shenzhen, Guangdong Province




Technology 1 Technology 2