Product appearance: The product belongs to the upright and waterproof type C base series. The interface is equipped with waterproof rubber rings, and because the interface shape is an oval interface, the mother seat supports repeated insertion and removal on both sides. The tail strip has 2 pin solder joints. Product performance: capable of withstanding 3A current, electrical characteristics: maximum 30 milliohms, insulation impedance: minimum 1000 megaohms, mechanical properties: maximum 20N, 8-20N, 6-20N after 5000 cycles. Can withstand 10000 repeated plugins and unplugs. Material used: The plastic is LCP black glue, the terminals are electroplated, the contact points are gold plated, the feet are tin plated, and the shell is bright nickel plated. Application scope: digital products, security products, portable devices, computers, communication products, etc.

When using the Type-C motherboard, it is important to pay attention to the USB connection on the connector and not allow any small debris to enter the interface. Otherwise, it may lead to poor contact between the Type-C motherboard and the USB plug, which may result in unrecognizable sensing. Type-C mother base has been used for a long time, so it is important to pay attention to daily interface dust cleaning to avoid excessive dust at the interface, which can easily rust the socket interface components. When installing and wiring the Type-C motherboard, attention should be paid to the various wiring points of the socket. The connected power lines should not be tied together, otherwise it may cause the circuit to not dissipate heat during use and directly burn out the socket. Therefore, when installing wiring on the Type-C base, gaps should be left between each wiring point to facilitate heat removal from the circuit.