The interface of the type-c male is an elliptical interface. The whole is made by stretching. There is a small buckle at the bottom that is fixed to the plastic body to prevent it from falling out. The product does not have a ground wire. There are 14p pins at the tail, arranged in a 7-7 symmetrical manner, and clamped between the 7-7 symmetrical and orderly pins by the PCB board during welding. The product is made of high-strength stainless steel as the hardware shell, environmentally friendly and high-temperature resistant plastic as the plastic body, and 14 pin pin with high conductivity copper.

The use of type-c

1 Fast charging

The standard Type-C interface can be extended to an output voltage of 20V, with an output current of 5A under the USB PD power transfer protocol, and can also transmit currents of 60W or even 100W.

2. Implement fast projection display

Type-C interface phones can directly project screens onto devices (such as televisions, projectors, etc.). Through Type-C wireless converter or Docking station and other products used in mobile phones and display devices, you can directly project pictures on mobile phones to large screen display devices.

3 Connect the card reader

We can use Type-C network cards to allow our phones to directly connect to the network cable and enjoy a better, faster, and smoother limited network without worrying about insufficient traffic or worrying about network instability.

4 Phone extensions

The OTG adapter of Type-C, paired with a USB flash drive, allows the phone to directly read the USB flash drive, enabling interoperability between computers and mobile devices. The operation is simple and can expand more space for the phone.