The interface of the type-c16p male head is an elliptical interface that supports blind insertion in both forward and backward directions. The overall length of the product is 7.2mm. The shell is wrapped with a rubber core, and there is a small buckle at the bottom that is fixed to the plastic body. The tail has 16 pin pins, which are symmetrically arranged in a 7-7 pattern. Weld with PCB board SMT board during welding.
The interface of the type-c16p male head is an elliptical interface that supports blind insertion in both forward and backward directions. The overall length of the product is 7.2mm. There are two reasons for the fast charging of the Type-C interface. Firstly, during charging, the charging line is thickened (multiple parallel connections), allowing a large amount of current; 2、 The Type-C interface has a communication port that can be negotiated with the phone to increase the charging voltage, thereby increasing the charging power and accelerating charging. The shell is wrapped with a rubber core, and there is a small buckle at the bottom that is fixed to the plastic body. The tail has 16 pin pins, which are symmetrically arranged in a 7-7 pattern. Weld with PCB board SMT board during welding. The product is made of high-strength stainless steel as the hardware shell, environmentally friendly and high-temperature resistant LCP plastic as the plastic body, and 14 pin pin pin with high conductivity copper. The product is widely used in various 3C digital devices such as mobile phones, digital cameras, MP3 players, DVDs, electronic toys, mobile power supplies, etc.
Contact person:
Mr. Chen 136-6225-2835 (same WeChat account)
Miss Chen 189-2385-0895 (same WeChat account)
Chen Weiting 135-3824-4786 (same WeChat account)
Address:
Building 10, Hongxing Gebu Qixiang, Songgang Town, Bao'an District, Shenzhen, Guangdong Province
![]() |
![]() |
Technology 1 | Technology 2 |