The interface of the product is an elliptical interface, with an overall length of 7.2mm and a size of approximately 8.4mm * 2.6mm. The most obvious feature of USB Type-C is its support for blind insertion on both sides. The appearance of the product is made by stretching the hardware shell. There are two crimped pins at the bottom, which are welded to the PCB board during welding. There are 16 pin pins at the tail, which are symmetrically and neatly arranged in an 8-8 form. When welding, weld with the PCB board SMT board. Hardware shell: high-strength stainless steel, plastic body: environmentally friendly and high-temperature resistant LCP plastic, 16pin pin: high conductivity copper. It can withstand repeated plugging and unplugging for over ten thousand times in terms of wear resistance life. The product is widely used in various 3C digital devices such as mobile phones, digital cameras, MP3 players, DVDs, electronic toys, mobile power supplies, etc. Has better electromagnetic interference (EMI) and radio frequency interference (REI) mitigation characteristics, with a maximum data transmission speed of 10Gbps, based on the USB3.1 specification; It can be used to transmit DisplayPort signals and supports 4K UHD image transmission. The USB Type-C connector design meets industry standards, with a slim and compact appearance and high strength, making it suitable not only for mobile devices but also for various industrial applications.