The interface of the type-c24p male head is an elliptical interface. The whole is made of a hardware shell by riveting. Rivet joint is located in the middle of the product. The characteristics of the USB3.1 type-c interface: it supports forward and reverse insertion, and supports high current and high voltage charging; Supports bidirectional power supply, with better electromagnetic interference (EMI) and radio frequency interference (REI) mitigation characteristics, and a maximum data transmission speed of 10Gbps. There are two pins at the tail, which are welded to the PCB board during welding. The small buckle is connected to the plastic body to prevent the internal terminals from falling out. There are 24Pin pins arranged neatly in a 12-12 symmetrical manner, and they are welded to the PCB SMT board during soldering. The product is made of high-strength stainless steel as the hardware shell, environmentally friendly and high-temperature resistant LCP plastic as the plastic body, and high conductivity copper as the pin. It can withstand repeated plugging and unplugging for over ten thousand times in terms of wear resistance life. Based on the USB3.1 specification. It can be used to transmit DisplayPort signals and supports 4K UHD image transmission. Power output capacity: standard cable 3A, interface 5A. It can provide a maximum power transmission of 100W.