The appearance of the product is made by riveting the hardware shell, with an elliptical interface. The length and width of the bottom of the product are extended. In order to have better contact with the PCB board. There are two pins and 24pin pins at the tail, and the 24pin pins are arranged in a symmetrical 12-12 pattern. When welding, the PCB board is clamped between symmetrical pins 12 to 12. The product supports data transmission and supports forward and backward blind insertion. Compared to ordinary Micro USB, type-c data cables have higher quality requirements due to the relationship between forward and backward insertion, otherwise there may be a risk of short circuit and burning at any time. The product is made of high-strength stainless steel as the hardware shell, environmentally friendly and high-temperature resistant LCP plastic as the plastic body, and high conductivity copper as the pin. It can withstand repeated plugging and unplugging for over ten thousand times in terms of wear resistance life. Widely used in various 3C digital devices such as mobile phones, digital cameras, MP3 players, DVDs, electronic toys, mobile power supplies, etc.