Product type c6p waterproof vertical plug female base, with an elliptical interface and a size of 8.34mm * 2.56mm. Due to the same pin signals at both ends of the rubber core, it supports forward and reverse insertion and extraction. The product comes with a waterproof rubber ring, with a length of 9.4mm and a width of 4.0mm. There are two pins at the bottom composed of a stainless steel shell, and the 6pin terminals are arranged in a straight line at the bottom of the plastic. During welding, both the pins and terminals are welded to the PCB board. One side of the product is equipped with a positioning column with a diameter of 0.85mm. The material of the product is high conductivity copper terminal, and the plastic is environmentally friendly and high-temperature resistant LCP plastic. The hardware shell is made of high-strength stainless steel, and the surface electroplating layer is made of bright nickel material. The type c6p waterproof vertical plug female base only supports high current charging and does not support data transmission function because it does not have relevant pin signal terminals. Therefore, the 6P pin number of the product type c female base interface cannot meet the current application of some terminal products and can only be used for some simple charging data. There are several types of pin specifications for conventional USB motherboards, including 6P, 12P, 14P, 16P, 24P, etc. The different number of pins also affects the functional characteristics of the USB motherboard. The pin pin is the core of the TYPE C motherboard, and its data transmission and current transmission ultimately rely on these pin terminals. Product performance: Rated current: 3A, contact impedance: 40m Ω max, insulation impedance: 100m Ω min250V DC, withstand voltage test: 300V AC, tin resistance: temperature 250 ± 5 ℃, overall insertion force: 0.5-2.0kgf, overall extraction force: 0.6-2.0kgf, service life: 10000 times, working temperature: -30+85 ℃.