Product appearance: The product belongs to the Type-C mother seat on the 16P board. Supports high current and high voltage charging, and supports data transmission. The main length of the Type-c6p mother seat is 8.3mm. The four feet are welded to the PCB board. The front two feet are 2.8mm long, the rear two feet are 3.4mm long, and the Centre-to-centre distance between the front and rear feet is 8.64mm. 16Pin single row arrangement and SMT welding with PCB board. The bottom buckle is fixed with plastic.

USB Type-C, also known as USB-C, is a hardware interface form of Universal Serial Bus (USB). The biggest feature of its appearance is that its upper and lower ends are completely consistent. Compared with Micro USB, this means that users no longer need to distinguish between the front and back of USB, and can plug in both directions. Type-C has a much smaller volume than Type-A and Type-B, and is the latest USB interface appearance standard.

The new generation USB 3.1 Gen2 has a transmission speed of 10Gbit/s, a three stage voltage of 5V/12V/20V, and a maximum power supply of 100W. The fast transmission of USB Type C also requires wires, and the 21 core oxygen free copper transmission conductor ensures the transmission of large currents. Currently, the electronic products that use Type C interfaces mainly include mobile phones, tablets, laptops, as well as extended digital accessories such as data cables, charging heads, and mobile power supplies

Product Material: The hardware shell is made of high-strength stainless steel, the plastic is made of environmentally friendly and high-temperature resistant LCP plastic, and the pins are made of high conductivity copper. It can withstand 10000 times of repeated plugging and unplugging for its wear-resistant service life.