Product appearance: The USB type-c mother seat belongs to the horizontal type-c mother seat series. During welding, the product lies on the PCB board in a 90 ° arc. The product has two small hook feet, which sink 0.8mm (0.8mm below the horizontal plane of the PCB board) when welding with the PCB board insert board. The type-c female seat interface is equipped with waterproof rubber rings, which play a firm and tight role when paired with the male head, especially in humid weather, to prevent water from entering and reduce the damage rate of the female seat and male head. The USB type-c motherboard also has 6Pin pins, arranged in a straight line shape. Solder with PCB board SMT. The difference between 6pin and 24pin is that their contact area is larger than that of 24pin. During welding, it can reduce problems such as pin foot false soldering and false soldering, and improve work efficiency. The type-c motherboard belongs to the simple 6p series motherboard and only supports high current and high voltage charging (improving charging speed and shortening charging time), without supporting data transmission. Supports bidirectional charging, using the USB Typc-C interface can charge both the device itself and power external devices.

Product Material: The plastic is environmentally friendly and high-temperature resistant LCP plastic, the shell is high-strength stainless steel, and the pins are high conductivity copper. It can withstand 10000 times of repeated plugging and unplugging for its wear-resistant service life.

The product is widely used in PD chargers, wireless chargers, car chargers, travel chargers, mobile power supplies, TWS Bluetooth headphones, and consumer electronics.