The USB type-c motherboard has four pins that are welded to the PCB board during soldering, and the product has a rear cover at the end. There are 14 pin pins on the back cover, with the front 7 pin pins connected to the PCB board for insertion and soldering, and the back 7 pin pins connected to the PCB board for SMT bonding. Copper exposed on the front tongue.
Product appearance: The USB type-c mother seat belongs to the horizontal type-c mother seat series. During welding, the product lies on the PCB board in a 90 ° arc. There are four pins that are welded to the PCB board during soldering, and the product has a back cover at the back. There are 14 pin pins on the back cover, with the front 7 pin pins connected to the PCB board for insertion and soldering, and the back 7 pin pins connected to the PCB board for SMT bonding. Copper exposed on the front tongue. The USB type-c14p motherboard supports high current charging and data transmission. The type-c motherboard has better electromagnetic interference (EMI) and radio frequency interference (RFI) mitigation characteristics, and even if disturbed during data transmission, it will not cause data interruption or abnormal data situations.
Product Material: The plastic is environmentally friendly and high-temperature resistant LCP plastic, the shell is high-strength stainless steel, and the pins are high conductivity copper. It can withstand 10000 times of repeated plugging and unplugging for its wear-resistant service life.
The product is widely used in consumer electronics such as PD chargers, wireless chargers, car chargers, travel chargers, mobile power supplies, TWS Bluetooth headphones, etc.
Contact person:
Mr. Chen 136-6225-2835 (same WeChat account)
Miss Chen 189-2385-0895 (same WeChat account)
Chen Weiting 135-3824-4786 (same WeChat account)
Address:
Building 10, Hongxing Gebu Qixiang, Songgang Town, Bao'an District, Shenzhen, Guangdong Province
![]() |
![]() |
Technology 1 | Technology 2 |