The type-c24p mother seat comes with a rear cover and has 24 pin pins, with 12 pin pins inserted on the plastic body and the other 12 pin pins attached to the plastic body. When welding, the first 12 pin pins are welded to the PCB board insert, and the last 12 pin pins are welded to the PCB board SMT mount. The interface of the product is an elliptical interface, with four pins welded to the PCB board, and the entire PCB board is positioned at a 90 ° angle during welding. The tail is equipped with two positioning rods, which are positioned by the positioning column before welding. The positioning column plays a positioning role but not a fixing role. The product supports high current charging and data transmission.

Features of USB Type-C:

1.Type-C interface socket end is the same as the original Micro USB specification, approximately 8.3mm × 2.5mm;

2. Can withstand 10000 times of repeated plugging and unplugging;

3. Support the "front and back insertion" function that can be inserted from both sides (similar to the Apple Lightning interface);

4. Slim design;

5. The maximum data transmission speed reaches 10Gbit/s;

6. The standard specification connecting wire equipped with Type-C connector can pass 3A current, and also supports "USB PD" with USB power supply capability, which can provide up to 100W of power.