The product has four pins that are welded to the PCB board during soldering. The first two feet are 1.9mm long and 0.6mm wide. The length of the hind legs is 1.6mm and the width is 0.6mm. The interface is an elliptical type, with copper exposed at the tongue end for one touch. There are four signal pins, namely A1, A12, B1, and B12. The 24 pin pins are arranged symmetrically and neatly in a 12-12 pattern, attached to the plastic body and welded to the PCB SMT board. The pin pin has positioning pins at both ends, which serve as the overall positioning of the product when it is to be welded on the PCB board and do not serve as a fixing device.

The most intuitive manifestation of the advantages of USB Type-C is that it allows you to completely reduce the hassle of inserting cables, eliminating the need for component damage caused by incorrect insertion or errors. In addition, due to technological innovation, Type-C can occupy less circuit board space while reducing wear and not being restricted by direction. USB-C is an industry standard connector used to transmit data and power on a single cable. Its full function application can support data, audio, video and charging at the same time, meeting all Functional requirement of the device end. Featuring small size, high speed, support for forward and backward insertion, and bidirectional data charging and transmission.