The product interface is an elliptical interface with 24 pins arranged symmetrically from 12 to 12 on the rear plastic body. It is welded to the PCB SMT board during welding. There are the first two hook legs that are welded to the PCB board during soldering. The type-c mother seat belongs to the horizontal mother seat series, which is horizontally positioned at 90 ° and sinks on the PCB board as a whole. The interfaces at both ends of the USB Type-C cable are the same and more slim. By defining the internal pins of the USB Type-C cable, it is evident that its upper left and lower right corners are symmetrical, providing the concept of forward and reverse insertion.

Type-C can support power transmission from the initial USB2.0 as well as USB3.0 and 3.1. In terms of power transmission, the most basic standards range from 5V/1.5A to 5V/3A, and can even support transmission characteristics up to 100W/20V/5A in terms of power. At the same time, it provides data transmission. In addition to USB data transmission, it can also provide video transmission, called DisplayPort (DP) data transmission, so that it can support DP. The product supports high current and high voltage charging, as well as data transmission. The material used in the product is environmentally friendly and high-temperature resistant LCP plastic, the outer fixed shell is made of high-strength stainless steel, and the Pin pin terminal material is high conductivity copper terminal. It can withstand repeated plugging and unplugging for over ten thousand times in terms of wear resistance life.