The interface of the type c2p mother seat is a C-type interface (elliptical interface). The appearance is made by riveting the hardware shell. The size of the interface socket end is approximately 8.3mm × 2.5mm. The type C base supports blind insertion of both front and back sides. There are two pins at the bottom, which are welded to the PCB board during welding. There are 2 pin pins, which are welded to the PCB board at a 180 degree angle.
The interface of the type c2p mother seat is a C-type interface (elliptical interface). The appearance is made by riveting the hardware shell. The size of the interface socket end is approximately 8.3mm × 2.5mm, with a slim design. The type C base supports blind insertion of both positive and negative sides (the 24 pins of the interface are symmetrically distributed in the center of the contact function). There are two pins at the bottom, which are welded to the PCB board during welding. There are 2 pin pins, which are welded to the PCB board at a 180 degree angle. The type c2p motherboard only supports charging function and does not support data transmission function. The product uses materials, hardware shell: high-strength stainless steel, plastic body: environmentally friendly and high-temperature resistant LCP plastic, pins: high conductivity copper. It can withstand repeated plugging and unplugging for over ten thousand times in terms of wear resistance life. Type-C 2pin female, mobile power, Smart speaker, Electronic cigarette, small fan, Electric shaver, electric mosquito swatter, small desk lamp, etc., Type-C has penetrated various market application needs. The height can be selected as H=13.1, 13.7, 14.2, or 15.1mm.
Contact person:
Mr. Chen 136-6225-2835 (same WeChat account)
Miss Chen 189-2385-0895 (same WeChat account)
Chen Weiting 135-3824-4786 (same WeChat account)
Address:
Building 10, Hongxing Gebu Qixiang, Songgang Town, Bao'an District, Shenzhen, Guangdong Province
![]() |
![]() |
Technology 1 | Technology 2 |