The type c8p mother seat belongs to the waterproof horizontal type c mother seat series. The interface is an elliptical C-shaped interface with 8 power pins above and below, symmetrically distributed in the contact function, thus supporting forward and backward blind insertion. The volume is as slim and compact as the interface lighting of an iPhone, with a size of approximately 8.3mm × 2.5mm. The lifespan can withstand 10000 repeated plugging and unplugging. Supports fast charging, with an output voltage of 20V, an output current of 5A, and a maximum output power of 100W. Supports bidirectional charging, allowing for the freedom to change the direction of power transmission, allowing for both self charging and reverse charging of external devices.

Product appearance: The interface of the product is an elliptical C-shaped interface. The inner end contains a tongue piece, and the tongue end does not expose copper. There are two small fish fork legs on the back end that are welded to the PCB board insert board, and a pair of positioning columns that serve as fixing during welding. There are 8Pin pins at the tail, which are welded to the PCB board during welding. The product uses materials, hardware shell: high-strength stainless steel, plastic body: environmentally friendly and high-temperature resistant LCP plastic, pins: high conductivity copper. Currently, it has been widely used in various electronic products such as computers, smartphones, tablets, peripheral accessories, storage hard drives, etc.