The vertical clamp type c24p mother seat belongs to the vertical clamp type c mother seat series. The appearance is made by riveting, with an elliptical interface that can be easily inserted and pulled out. Users do not need to distinguish between the front and back sides of the type c24p clamp base when using it. This not only saves time, but also reduces the damage rate of the product caused by plug errors. The tongue end of the product does not expose copper, with a height of 10.5mm. There are 24p terminal pins at the bottom, arranged symmetrically in a 12-12 pattern. The distance between the terminal clamp plates is 0.8mm, the distance between the terminal pin pins is 0.5mm, and the pins are harpoon pins. Product performance: rated current: maximum 5.0A, voltage: 200V, temperature range: -55 ℃~85 ℃, contact resistance: 40 MILLIONHM MAX, insulation resistance: 100 MEGOHMS MIN, insertion force: 5N~20N, decoupling force: 8N~20N, durability: 10000 cycles of plugging and unplugging. Application scope: toys, electronics, appliances, communication products, digital products, household appliances, remote controls, security products, etc. Material used: The plastic body is environmentally friendly and high-temperature resistant LCP plastic, the pins and terminals are made of copper alloy, and the shell is made of high-strength stainless steel material.