USB interface 2.0 connector. 3p terminal plastic shell with protective cover and dustproof mother base, short body USB mother base AF11.5 long, single rolled edge with plastic cover, four pin white tape shielding cover belongs to the charging head dedicated USB mother base, with a main body length of 11.5mm, which is one of the short body USB mother bases. The packaging specification is four pin plug-in board DIP welding, with 3 pin numbers, and the material is copper plated gold. The plastic terminal is a forward type, and the main body height (including plastic) is 6.0H, The interface adopts a single rolled edge (the inner side of the sheath adopts a straight edge process), and the sheath material is made of environmentally friendly and high-temperature resistant LCP plastic. This USB motherboard is generally used on charging heads, and the sheath has an insulation and shielding effect. Currently, our company has mass produced this forward short body USB motherboard AF11.5 with a 6.0H long single rolled edge and a protective cover with four foot white tape shielding cover. If you need relevant samples, please contact us directly!