USB 3.0 socket. USB 3.0 clamp mother base. USB 3.0 connector pin definition, USB3.0 mother base. 3.0 clamp mother base clamping distance 1.0 USB A mother 180 degree clamp short body 11.0MM image USB3.0 mother base | 3.0 clamp mother base clamping distance 1.0 USB A mother 180 degree clamp short body 11.0MM image is for reference only and does not represent the final quality of the product. If you are interested in purchasing this product, please refer to the USB3.0 mother base | 3.0 clamp mother base clamping distance 1.0 USB A mother 180 degree clamp short body 11.0MM image, USB-2.0 interface connector, USB-3.0 interface connector, long body USB interface connector, AF female socket interface connector, USB measuring and inserting 2.0 female socket short body 10.0MM interface blue rubber core, USB AF female socket long body side inserting curved leg D type straight edge/crimping, FPC interface connector, mobile phone interface connector, etc. The products are widely used in Small appliance, digital audio and video, household appliances, health equipment and other products, Professional matching mobile power USB 3.0 standard interface. The soldering method of this product is 9Pin pin plug-in board welding fixation, and the front of the hardware shell is equipped with dual fixed pins. In terms of material used in the product: the plastic is environmentally friendly and high-temperature resistant, the hardware surface is electroplated with bright nickel, the 9Pin pin terminal base material is high conductivity copper alloy, and the surface is electroplated with tin. Due to the small size of the USB3.0 base, it is generally difficult to solder the USB interface pins. If the distance between the pins is too close during critical welding, the two pins may be accidentally welded together. So first, you can use flux to wipe the solder joint pins before welding, and be careful not to stick too much flux, otherwise it will be difficult to wipe off later. Because the function of soldering flux is not only to make welding smoother, but also to fix the USB port and prevent it from shifting during welding. After coating, it is necessary to use a soldering iron to clean the tin on each soldering point. The purpose is to prevent excessive tin from causing virtual soldering and other phenomena on the USB base,