With the popularization of electronic products, most modern people use type-c connectors for their daily or work needs. The market share of connectors is still quite large, so do you know the advantages and disadvantages of using testing! In the use of type-c mother base, the actual current and voltage parameters should not exceed the rated value of the socket to prevent overload operation of the mother base, to avoid accidents such as socket short circuit and fire, and to prevent water droplets and other vapor liquids from invading the mother base interface, in order to avoid some short circuit problems during use. If the mother socket plug is damaged, it should be replaced in a timely manner. Otherwise, short circuits and sparks may occur during use, and it may also cause internal fires in the socket. For installation environment requirements, in places with heavy moisture in the kitchen and bathroom, a protective box should be added to the type-c mother socket. Otherwise, areas with heavy moisture can easily cause internal short circuits and burn out the socket. Before and after use, pay attention to the strength of the mother socket plug and do not pull it out too hard. Otherwise, there is poor contact between the plug and the type-c mother base. It is recommended not to use multiple type-c mother bases in parallel connection at the same time, as the power of the working current of multiple sockets is relatively high, far exceeding their bearing range. This may directly cause the possibility of burns.

When selecting a type-c motherbase, attention should be paid to indicating the output voltage and current size of the USB interface. Different current sizes of the type-c motherbase should be selected based on the equipment. Of course, the higher the current, the more expensive the price. Secondly, it should be determined whether the motherbase material is heat-resistant. It can pass the 750 ℃ hot wire test, which means that when encountering an open flame, the socket shell will not show flames. It is not recommended to have a universal hole on it. It is difficult for the copper strip to reach the standard in terms of Bite force quotient. The plug pin and the copper strip are easy to have poor contact, resulting in temperature rise and fire.

The advantage of type-c is that the mother base can be connected in a forward and reverse manner, and can be interchanged in two directions. Its general mechanical life can withstand 10000 repeated plugins and plugins, and it is compatible with supporting interfaces such as data and audio devices and power supplies. In addition, its speed can reach up to 10G/S, and its current specification is between 3A and 5A. It supports miniaturization. For data mode, it has bidirectional high-speed data transmission, and its two channels can also support up to 20G/S, In addition, it can also be compatible with the USB 2.0/3.0 specification. For different USB motherboard interfaces, it can be achieved through switching.

The disadvantage of type-c is that the distance between the PIN and the PIN of the mother seat is small, which can easily lead to the entry of some hair, debris, etc., causing a micro short circuit between the vbus and GND at the charging terminal. The structure is relatively complex, and processing accuracy issues can also lead to unstable contact resistance. Multiple insertion and insertion of the mother seat can lead to an increase in resistance.

The above is a breakdown of some small knowledge about the application scope of type-c mother seat. If you feel that there are any areas that are not clear enough, you can directly contact our online customer service personnel. The direct supply of our products is guaranteed, and the prices are affordable. We believe many friends have bought our products, and we hope that interested new and old customers can come to inquire and choose from us. Our products are widely used in various electronic products and are exported to various countries.