Light touch switches are often used in daily life and work, and due to the various specifications of light touch switches, their applicability varies. If you do not understand the basic knowledge of touch switches, it is easy to cause switch failures during use, and it can also cause the entire equipment circuit to malfunction. The manufacturer of touch switches has summarized the details of using touch switches in daily life in response to this situation and shared them with users.

During the installation process of the light touch switch, when the welding joint of the switch is not completely cooled, do not lightly touch or shake the contact position, otherwise it may cause the switch to loosen. Deformation phenomenon. When using welding switches, do not use high concentration water-soluble flux. Otherwise, when the temperature is too high, the substances oxidized by water-soluble flux will have a certain corrosive effect on the switch.

Kind reminder: Common problems with touch switches: tactile sensation, many customers have been reacting, and many samples sent by suppliers have a very good tactile sensation, but the tactile sensation is different when it comes to mass production. In fact, this problem is very common. We all know that the feel and button force of switches are controlled by shrapnel. We often say that shrapnel is divided into phosphor copper shrapnel and stainless steel shrapnel. Currently, many manufacturers choose phosphor copper shrapnel to save costs, which has a high cost-effectiveness and is also the reason for its widespread use. However, the phosphor copper shrapnel undergoes transformation and severe shrinkage after being heated in the furnace, which leads to poor hand feel.